Electric Blast Furnace: Difference between revisions
m
→Making Your EBF Work: formatting
m (cleanup) |
m (→Making Your EBF Work: formatting) |
||
Line 75:
=== Maintenance ===
Like all multiblocks, when first formed the EBF will have a full suite of [[Maintenance]] problems, and maintenance problems will periodically (but rarely) pop up after that. These require tools to fix; a Hammer, Wrench, Soft Mallet, Screwdriver, Crowbar (GT, not Railcraft) and Soldering Iron. If you do not have a soldering iron, you can run the EBF with one maintenance problem not fixed, but will need three energy hatches.
=== Circuits ===▼
Many recipes require a programmed [[Circuit]] or [[Ghost Circuit]] to be set. When using a programmed circuit item, place it in the Input Bus along with the other recipe ingredients. It is not consumed in the process. Make sure to have the right one for the recipe. To set a ghost circuit, right/left click on the box in the lower right corner of the Input Bus to change the number, or shift-right click to choose a circuit setting directly.▼
=== Power ===
Line 83 ⟶ 80:
[[Battery Buffer]]s are another option. Each buffer needs at least two batteries to provide 2A, which means a four slot or bigger buffer. Buffers are HIGHLY recommended for use with unbuffered [[Steam Turbine]]s, due to their inconsistent nature. They are not necessary for [[Combustion Generator]]s or [[Gas Turbine]]s, but can be useful. Buffers can also help where the current power infrastructure is insufficient to run the EBF constantly.
▲=== Circuits ===
▲Many recipes require a programmed [[Circuit]] or [[Ghost Circuit]] to be set. When using a programmed circuit item, place it in the Input Bus along with the other recipe ingredients. It is not consumed in the process. Make sure to have the right one for the recipe. To set a ghost circuit, right/left click on the box in the lower right corner of the Input Bus to change the number, or shift-right click to choose a circuit setting directly.
== Upgrading ==
| |||