Electric Blast Furnace: Difference between revisions
m
→Troubleshooting: Outputs full added
m (link) |
m (→Troubleshooting: Outputs full added) |
||
Line 104:
**Check the gas (or secondary ingredient) and item combination matches the set circuit.
*Make sure the Muffler Hatch is not blocked by another block.
*Make sure the Muffler Hatch is facing
*It could also be caused by the EBF not getting any power at all.
** Check that cables are connected.
** Ensure generators/battery buffers are pointed in the correct direction
** See if there are any accidental plates/foils applied to GT block faces - remove with [[Crowbar]].
'''Structure Incomplete'''
*Try breaking the controller and replacing it.
*Check that nothing has occupied the interior of the EBF, such as invisible lighting blocks.
*If the EBF has never formed before, check that all the blocks are in the correct place and orientation. Muffler must face
'''Outputs Full'''
* Output Bus is full and void protection is on.
* There is no Output Hatch that can accept gasses - one is needed on the '''top layer''' of the EBF for gas.
== Tips ==
| |||