Maintenance
Introduction
Almost all multiblocks work with the maintenance system of gregtech. In that system a multiblock may generate random maintenance issues, which need to be fixed. If they are not fixed the multiblock will consume more power, or in the case of a generator, generate less power. If too many maintenance issues occur, the machine won't work anylonger.
Maintenance Hatch
The usual Maintenance Hatch is the first tier Maintenance Hatch in the game. They should not be shared between multiblocks if you want to wallshare them. To fix them you can either use Ducttape to fix all issues at once, or use GT Tools to fix them one by one (In newer versions you can also use a toolbox, containing the needed tools to fix all isues at once, even without opening the GUI!)
- Pipe is loose: Wrench
- Screws are loose: Screwdriver
- Something is stuck: Soft Mallet
- Platings are dented: Hammer
- Circuitry burned out: Soldering Iron + Soldering Alloy
- That doesn't belong there: Crowbar
Auto Maintenance Hatch
The Auto Maintenance Hatch is the higher tier version of the Maintenance Hatch and gated to LuV. It needs to be supplied with 4 Ducttape, 2 Lubricant Cells, 4 Steel Screws and 2 HV-Circuits. But will fix any occuring maintenance issue instantly.
Auto-Taping Maintenance Hatch
The Auto-Taping Maintenance Hatch is the highest tier Maintenance Hatch. It is gated to UV-tier and rather costly. However once build you no longer need to worry about any maintenace occuring, without any running cost! When wallsharing multiblocks the Auto-Taping Maintenance Hatch may even be shared between them without an issue.