Revision as of 02:29, 31 December 2023 (view source) Embri (talk \| contribs) m (→‎How to Build: header) ← Older edit		Revision as of 03:20, 10 January 2024 (view source) Embri (talk \| contribs) m (correcting max size.) Newer edit →
Line 19: File:SmelteryCrosssection.png\|alt=Cross-section of a 2x2 Smeltery\|alt=a side view of a partial smeltery multiblock. There is a 2x2 base of black bricks on the bottom, two high walls left, right and back with no blocks on the bottom edges. On the right are a faucet and casting basin.\|2x2 cross-section </gallery> The Smeltery can be built with any interior footprint from 1x1 up to ~~11x11~~7x7, no max build height. The size of the interior determines how many items can be melted at once and its total fluid capacity. To be a valid structure the ~~interior~~horizontal volume must be a square; same length and width, with any height of one or more. The bottom layer can be any block tagged as 'smeltery structure block' in [[NEI]]. The Controller must face outwards, its back touching the Smeltery's interior. At least one lava holding block (Seared Tank, Seared Glass or Seared Window) must be on the same y level as the Controller. Drains, Tanks, and the Controller must all go on a hollow layer above the base. The large black square on Drains faces the interior, while the smaller round hole is the output side. The edges and corners are not necessary to have a valid Smeltery build. Requires:

Smeltery: Difference between revisions

Smeltery (view source)