Tree Growth Simulator

Introduction

The Tree Growth Simulator is a GT++ multi-block made for automatically growing trees. It will consume power (and requires a starting sapling to run, which does not get consumed) and produce large amount of logs. Alternatively it can be set to produce saplings by providing Fertilizer in an Input Hatch.

Construction

A Tree Growth Simulator is a 3x3x3 structure that requires:

x1 Controller block; front, centered
x1 Maintenance Hatch; anywhere
x1 Energy Hatch, anywhere
x1 Muffler Hatch, anywhere
x0+ Input Bus, optional, anywhere^[1]
x0+ Output Bus, optional, anywhere^[2]
x0+ Input Hatch, optional, anywhere
x0+ Output Hatch optional, anywhere
x8+ Sterile Farm Casing

↑ One Input Bus required for the sapling.
↑ One Output Bus required for the output.

Usage

The Tree Growth Simulator is often used for a Benzene setup, as it produces logs at a fast rate and does not take up much space compared to other Tree Farm alternatives such as the Farming Station. A Saw is required in the GUI slot for the Tree Growth Simulator to run.
The production of logs from the Tree Growth Simulator can be seen below:
${\color {Black}Production=(2*tier^{2}-2*tier+5)*5*SawBoost}$
Where tier is Energy tier and the Saw Boost can be seen below:

Saw Type	Saw Boost
Saw	1x
Buzzsaw	2x
Chainsaw	4x

Note:The speed of the Tree Growth Simulator is 5 seconds and can not be increased.

[1] One Input Bus required for the sapling.

[2] One Output Bus required for the output.

[1]

[2]