Electric Blast Furnace: Difference between revisions
m
moving gas capture and coils to upgrades section
m (→Troubleshooting: add link) |
m (moving gas capture and coils to upgrades section) |
||
Line 51:
* The Output Hatch, if used, goes in any of the other eight positions.
* Fill the rest of the 3x3 with Heat Proof Machine Casings.
=== Heating Coils ===▼
[[Coil]]s determine what recipes the EBF can do, and how well it does them. Some recipes will require more heat than Cupronickel coils provide. For instance, Energetic Alloy requires 2200K, while Cupronickel Coils only provide 1800K- thus, a EBF cannot smelt Energetic Alloy until its coils are upgraded. An EBF or group of wallsharing EBF's can only have one coil type.▼
An extra bonus value will be added to your EBF's heat capacity of 100K * (energy tier - 2), where LV is tier 1, MV is tier 2, etc. This will allow some items to be smelted more efficiently at certain tiers, as described below. The basic setup of two LV Energy Hatches @ 2A each is MV level energy, which simply wipes out the - 2 penalty. With an HV Energy Hatch or two MV Hatches, the EBF has a 100K heat bonus. The [[Portable Scanner]] can be used to read an EBF's heat capacity and energy tier.▼
=== Gas Recovery ===▼
The '''Output Hatch''' is optional and will collect waste gasses for some recipes (C0<sub>2</sub>/CO/SO<sub>2</sub>), mostly ore dusts. The amount collected is based on the tier of the Muffler Hatch and at LV it will get nothing (0%); a MV Muffler recovers 13% of the possible total. The quantities shown in NEI are for the 'best' Output Hatch (UHV). ▼
== Making Your EBF Work ==
Line 86 ⟶ 78:
120 EU/t is insufficient power to smelt many recipes, the most important one being stainless steel. The EBF must be supplied with 4 amps of MV into two MV Energy Hatches to achieve 480EU/t, the required power for stainless steel. Keep in mind that running 120 EU/t recipes (such as aluminium or steel) will consume TWICE as much power at 480 EU/t. It may be desirable to set up a second EBF dedicated to higher power recipes if resources allow.
▲==== Heating Coils ===
▲[[Coil]]s determine what recipes the EBF can do, and how well it does them. Some recipes will require more heat than Cupronickel coils provide. For instance, Energetic Alloy requires 2200K, while Cupronickel Coils only provide 1800K- thus, a EBF cannot smelt Energetic Alloy until its coils are upgraded. An EBF or group of wallsharing EBF's can only have one coil type.
▲An extra bonus value will be added to your EBF's heat capacity of 100K * (energy tier - 2), where LV is tier 1, MV is tier 2, etc. This will allow some items to be smelted more efficiently at certain tiers, as described below. The basic setup of two LV Energy Hatches @ 2A each is MV level energy, which simply wipes out the - 2 penalty. With an HV Energy Hatch or two MV Hatches, the EBF has a 100K heat bonus. The [[Portable Scanner]] can be used to read an EBF's heat capacity and energy tier.
▲==== Gas Recovery ====
▲The '''Output Hatch''' is optional and will collect waste gasses for some recipes (C0<sub>2</sub>/CO/SO<sub>2</sub>), mostly ore dusts. The amount collected is based on the tier of the Muffler Hatch and at LV it will get nothing (0%); a MV Muffler recovers 13% of the possible total. The quantities shown in NEI are for the 'best' Output Hatch (UHV).
=== Automation ===
Thankfully, automating an EBF is extremely easy. Input hatches accept fluids from any pipe, or manually in the GUI using cells. Input buses accept items from item pipes or hoppers. Output Hatches will auto-output fluids into pipes, but will void them automatically if the hatch is full. Output Buses will automatically output items into any container in front of them, or into an item pipe or hopper, but will void any new outputs if completely full.
==== Wallsharing ====
Multiple Electric Blast Furnaces can be built using less resources by [[Wallsharing]]. Like the [[Bricked Blast Furnace]], a wallshared EBF can share one or two sides of blocks with another adjacent EBF. The same type of [[Coil]] must be used across all wallshared furnaces, and due to their high [[Pollution]] output consideration should be given to the build location. Maintenance Hatches cannot be shared and it's not recommended to share Energy Hatches due to the EBF's high power demands.
| |||