Precise Auto-Assembler MT-3662: Difference between revisions

Content added Content deleted

Inline

Revision as of 00:20, 12 August 2023

The Precise Auto-Assembler is a multiblock from Good Generator. It is used to build Good Generator components or can function as a multiblock Assembler, running recipes in parallel.

How to Build

The assembler accepts different tiers of casing and will run recipes up to that tier. It supports TecTech Energy Hatches. The front and back have recessed glass panes enclosing a single block wide gap of air.

Requires:

1x Controller, front bottom
1x Maintenance Hatch, any casing location
1x Muffler, any casing location (?)
1x Input Hatch, any casing location
1x Output Hatch, any casing location
1x Input Bus, any casing location
1x Output Bus, any casing location
x42+ Precise Electronic Unit Casings (MK-I, MK-II or MK-III)
12x Tungstensteel Frame Box
42x Glass (EV Tier)
21x Machine Casing (Not Machine Hulls!)

Usage

It can run in two modes: assembler and precise assembler and will run different recipes depending on the mode. As the assembler can run in only one mode at time, it's advised to build two.

In assembler mode it will run sinlge-block assembler recipes but in parallel.
In precise assembler mode it will run precise assembler recipes but not assembler ones.

@@ Line 1: / Line 1: @@
+{{cleanup|missing exact placement & quantity limits for various hatches/busses, some infobox data}}
-{{stub}}'''Precise assembler'''[[File:Precise Auto-Assembler MT-3662.png|alt=Precise Auto-Assembler MT-3662|none|thumb|Precise Auto-Assembler MT-3662]] The precise assembler is a multiblock from good generator. It can run in two modes: assembler and precise assembler and will run different recipes depending on the mode.
+{{Infobox Test
+|name=Precise Auto-Assembler MT-3662
+|image=Precise Auto-Assembler MT-3662.png|alt=A five by eight multiblock with grey riveted blocks on the top and bottom indigo frame boxes for the side, and a controller and maintenance hatch at the bottom center. There's a large glass window in the middle showing a large hollow interior.
+|mod=Gregtech 5
+|type=Tile Entity
+|tooltip= Controller Block for the Precise Assembler
+|quest=Precise Assembler
+|tier=IV
+|machinesize= 9x5, 5 tall, hollow
+|pollutionoutput= 780/s
+|blastresistance=6
+|hardness= 1
+|gteuusage= ?
+|gtvoltagein=
+|gtamperage=
+}}
+The Precise Auto-Assembler is a [[multiblock]] from Good Generator. It is used to build Good Generator components or can function as a multiblock [[Assembler]], running recipes in parallel.
+== How to Build ==
-(Why is this up here? It should be just above the modes. Please fix.)
+The assembler accepts different tiers of casing and will run recipes up to that tier. It supports TecTech Energy Hatches. The front and back have recessed glass panes enclosing a single block wide gap of air.
+Requires:
-• In assembler mode it will run assembler recipes but in parallel.
+* 1x Controller, front bottom
+* 1x Maintenance Hatch, any casing location
+* 1x Muffler, any casing location (?)
+* 1x Input Hatch, any casing location
+* 1x Output Hatch, any casing location
+* 1x Input Bus, any casing location
+* 1x Output Bus, any casing location
+* x42+ Precise Electronic Unit Casings (MK-I, MK-II or MK-III)
+* 12x Tungstensteel Frame Box
+* 42x Glass (EV Tier)
+* 21x Machine Casing (Not Machine Hulls!)
+== Usage ==
-• In precise assembler mode it will run precise assembler recipes but not assembler ones.
+It can run in two modes: assembler and precise assembler and will run different recipes depending on the mode. As the assembler can run in only one mode at time, it's advised to build two.
-The assembler has different tiers of casing and depending on the tier it will run recipes up to that tier.
+* In assembler mode it will run sinlge-block assembler recipes but in parallel.
+* In precise assembler mode it will run precise assembler recipes but not assembler ones.
-As the assembler can run in only one mode at time it is advised to build two.
 [[Category:Multiblocks]][[Category:Gregtech]]