|
== Underground Fluids ==
Underground Fluids require multi-block [[Oil/Gas/Fluid Drilling RigsRig]]s. There are currently 5 types of underground fossil fuels:
* Natural Gas
* Light Oil
* Heavy Oil
Use the [[Seismic Prospector]] to locate chunks with large amounts of oil. The spawning is done in an 8x8 chunk grid with no offset.
For example, chunks 15,15; 15,16; 16,15; 16,16 are all in different 8x8 oil spawns - a smart player can use this to their advantage when prospecting. Within the 8x8 chunks, the oil can be +- 25% the designated value.
Any oil amount above ~200 L/t is a good place to begin drilling.
Higher tier oil[[Drilling derricksRig]]s will drillharvest abigger wider area around itareas, gathering oil from multiple chunks.
=== Natural Gas ===
| 250L || 45L || 15L || 60L
|}
=== Oil Drilling Rig Tiers and Operation Range ===
[[Drilling Rig]]s are used to extract fluids from below the bedrock, including Oil. They come in five tiers, four which harvest from ever increasing ranges and the Infinite Gas/Oil/Fluid Drilling Rig which doesn't deplete oil fields. Oil Drilling Rigs always work on a fixed chunk grid inside their oil field. Infinite Oil is also possible from the [[Space Elevator]].
[[File:Oil-2.jpg|thumb|670x670px|alt=|none]]
=== Oil Drill Yields ===
Calculating how much oil a drill will yield is a little complicated. The drills run on "operations" and how many ticks equal one operation varies based on the drill machine tier, and the energy hatch tier. The amount of oil pulled from each chunk per operation depends on the tier of the energy hatch above the minimum tier as well.
One important concept is that the oil drill will always drill on range size boundaries. For a 1x1 tier 1 oil drill, that isn't important. For 2x2 or 4x4 tier 2 or 3, the drill, no matter where it is placed in the 2x2 or 4x4 grid, will always pull oil from the same group of chunks. For example, looking at X for a 4x4 drill
{| class="wikitable"
|+ Chunks and how they group for a 4x4 drill
|-
|Chunk X
|Group
|-
| -5
| -2
|-
| -4
| -1
|-
| -3
| -1
|-
| -2
| -1
|-
| -1
| -1
|-
| 0
| 0
|-
| 1
| 0
|-
| 2
| 0
|-
| 3
| 0
|-
| 4
| 1
|-
| 5
| 1
|}
Here are some oil values in a 4x4 chunk group.
{| class="wikitable"
|+ Example oil found in chunks
|-
| Amount
| Amount
| Amount
| Amount
|| Total oil in the row
|-
|423
|432
|654
|633
|| 2142
|-
|630
|499
|563
|476
|| 2168
|-
|476
|602
|560
|444
|| 2082
|-
|458
|651
|490
|525
||2124
|}
Total oil in 4x4 grid = 8516
To calculate the ticks per operation, use the base values below
{| class="wikitable"
|+ Base ticks per operation
|-
| Tier
| Base value
|-
| 1
| 8
|-
| 2
| 32
|-
| 3
| 32
|}
For each tier the energy hatch is above the minimum, divide the base value by 2. For example, if you are using an HV energy hatch on an MV oil drill, your ticks per operation is 4.
Now, the amount of oil pulled out of each chunk is (the amount in the chunk) * (.5 + .25 (tiers above minimum)). So for an MV energy hatch on an MV oil drill, your oil removed is .5.
For an HV hatch on an MV drill, the oil removed is .75.
So now we can combine these together. For a tier 2 drill with HV energy hatches (the minimum)
8516 * (.5) = 4258 oil per operation.
To calculate oil per second
(4258L / operation) * (20 ticks per second) / (32 ticks per operation) = 2661 L/s
Measuring for 30s, I retrieved 80902L, or 80902L/30S = 2692L/s
Watch out for the values given by the prospector. The rounding it does is not the same as the oil pump code, so you may get +-1L per each chunk.
=== Total oil Yield per Chunk ===
The total oil or any fluid that can be extracted from a chunk can be found by the given formula
Total oil yield =1000*N^2 - 500*N*X-500*X
N=Z/X
Z=How much in Liters the pump will give before pumping starts
X=How much does the pump decrease per 1000 cycles (generally 1)
[[Category:Worldgen]]
|