Matter Junction: Difference between revisions
Content added Content deleted
m (Fixed wrong voltage) |
m (Added note about explosion) |
||
| Line 12: | Line 12: | ||
== Introduction == |
== Introduction == |
||
The Matter junction is used to route [[Elemental matter]]. You can specify which input goes to which output by using a [[Parametrizer]] to set a destination for each source. Every input can only be routed to one output. For transfering Elemental matter the machine will use (Number of outputs + number of inputs) / 2 (rounded down) amps at 524288 volts. |
The Matter junction is used to route [[Elemental matter]]. You can specify which input goes to which output by using a [[Parametrizer]] to set a destination for each source. Every input can only be routed to one output. For transfering Elemental matter the machine will use (Number of outputs + number of inputs) / 2 (rounded down) amps at 524288 volts. Note that the machine can explode if it receives too much elemental matter, this can be prevented if high enough overflow hatches are used. |
||
== Construction == |
== Construction == |
||
Revision as of 08:01, 26 July 2022
Introduction
The Matter junction is used to route Elemental matter. You can specify which input goes to which output by using a Parametrizer to set a destination for each source. Every input can only be routed to one output. For transfering Elemental matter the machine will use (Number of outputs + number of inputs) / 2 (rounded down) amps at 524288 volts. Note that the machine can explode if it receives too much elemental matter, this can be prevented if high enough overflow hatches are used.
Construction
When constructed you can switch any Molecular Casing with an Elemental input hatch, Elemental output hatch or Elemental overflow hatch. Due to the limitation of TecTech multis only having 10 IO blocks, you can only use up to 10 inputs and outputs.